See all products by BSI

BSI Insta-Cure+ Super Glue

  • Sale
  • Regular price $24.99
Shipping calculated at checkout.


BSI Insta-Cure+™ is a higher viscosity CA for loose-fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close-fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

Works Best On:

  • Balsa Wood
  • Soft Wood

Works Good On:

  • Hard Wood
  • Glass & Metal
  • Fiberglass
  • Ceramics
  • Hard Plastics
  • Rubber
  • Laminating
  • Water-Resistant
  • Reinforcing

Size: 2 oz. (56.8 g)

Directions

Unscrew the top from the nozzle. For finer applications, use the extender tip. Apply Insta-Cure+™ CA to one side of the parts being joined, then hold them tightly together for 5-15 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing the screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak the extender tip in acetone for cleaning.

Special Orders

Special order items are always given priority treatment. However, for most of the special orders, you can expect a turnaround time of 4 to 8 weeks depending on manufacturer lead times and pandemic-related backorders.

Some bows such as custom target bows and some high end bows may take longer due to being made-to-order from the manufacturer directly. Besides bows and some high end products, all other special orders are on regular stocking basis. In addition some left handed products like high end target equipment can also experience unforseen delays due to manufacturer batch production.

We does its utmost to meet these timelines but if any unforeseen issues arise we will do our best to resolve them in an expeditious manner.

Please note that we cannot refund or cancel the order once the order is placed with the manufacturer.


x