Viper Technology

Designed to bridge the gap between archery hunting and competition bow sights, the Viper Archery Products Sidewinder provides the fastest, easiest, and most precise elevation adjustments of any single-pin sights on the market. The Sidewinder is truly a dual threat on the 3D course and in the field.
The Sidewinder features a true competition-style up-pin that is both thin and low profile, so target blocking is extremely minimal. The stainless steel up-pin completely encapsulates and protects the 24-inch-long fiber-optic strand. The strand wraps around the housing above a reflective strip for maximum light gathering, which also makes replacement easy. The Sidewinder is available with a choice of three fiber-optic diameters: .010-, .015- or .019-inch.
The sight’s elevation system is the most unique feature of the Sidewinder design; it is exceptionally functional, intuitive, and quick to adjust, either on the course or in the field. It requires no locking screw, handles, or knob to be loosened before adjusting for distance. The archer simply turns the four-winged aluminum Sidewinder knob at the back of the sight to set it to the desired yardage. Operation is quite smooth, thanks to the Delrin® thermoplastic gear-driven transfer system, and the sight housing remains horizontal throughout the range of travel. The sight can travel from its top-most position two inches down to the bottom position in less than one full turn of the Sidewinder knob. A .030-inch stainless steel pin on the Sidewinder transfer bar corresponds to a strip of white masking tape on the rearmost surface of the sight. This allows the user to precisely mark the distances of the specific equipment being used, and it can be replaced or taped over if the equipment setup is changed.
The Sidewinder’s aluminum sight housing has a 2-inch aperture that is threaded to accept optional Zeiss coated lenses for competition or an optional shade housing and sight light for competition or hunting, so archers can switch between target and hunting setups with ease. A highly visible 0.35-inch diameter, 1-inch-long bubble level is located at the bottom of the housing.
The Sidewinder housing unit has elevation and windage adjustments that require use of an Allen wrench to fine-tune the head position. The Sidewinder measures 6.75 inches in length and weighs 7.5 oz.
The Sidewinder bow sight is manufactured in the USA, and is constructed of the highest quality materials—hard-coat-anodized 6016 T6 aluminum, Delrin, brass and stainless steel up-pin, and stainless steel hardware—for maximum durability and a lifetime of worry-free use. This product is threaded for an optional lens. They will need the Retainer Ring kit to install a lens into the sight. All Viper Sights are threaded for an optional lens.

Venom Pro XL five-pin bow features a longer, adjustable sight radius that allows the user to find the perfect peep-to-pins distance. It is constructed of machined and anodized 6061 T6 aluminum with stainless steel hardware for strength, rigidity, and durability. The Venom Pro XL’s aluminum sight housing has a 2-inch aperture that is threaded to accept optional Zeiss-coated lenses. A highly visible 0.35-inch diameter, 1-inch-long bubble level is located at the bottom of the housing. Four or Five aluminum Razor Pins are independently adjustable for elevation, and three diameters of fiber-optic threads are available: 0.010-, 0.015- or 0.019-inch.
The Venom Pro XL is equipped with second and third-axis adjustments that are located before the windage and elevation adjustments to allow for correct true-level positioning of the sights housing. The Venom Pro XL has major and micro windage and elevation adjustments, which allows for maximum accuracy as well as a wide range of adjustments. A lever lock secures the micro-adjustments.
The Venom Pro XL features a long rail with a dovetail design that incorporates five detents at 3/4-inch increments for a total of three inches of sight-radius adjustment. The Venom Pro XL’s method of locking down the dovetail seats itself in the same position every time after removal for transportation. The Venom Pro XL also incorporates a threaded hole in the dovetailed rail for the installation of a sight light, which prevents glare in the sight housing.
The Venom Pro XL measures 11 inches long and weighs 10.8 oz. Venom Pro Series bow sights are manufactured in the USA and carry Viper Archery Products’ limited lifetime warranty.

Viper Target Scope is machined from 6061 T6 aircraft aluminum. Each Viper Target Scope features a true competition-style up-pin that is both thin and low profile, so target blocking is extremely minimal. The stainless steel up-pin completely encapsulates and protects the 24-inch-long fiber-optic strand. Zeiss coated glass lenses provide crystal clear sight pictures, with 2X, 3X, 4X, and 6X magnifications available. The Viper Scope can be mounted with the pin that is traditionally oriented or inverted to expose the lower part of the target. It comes complete with housing, retainer ring, and lens.

Revolutionary Magnetic Blade Technology holds blades closed until impact, creating massive entry and exit wounds. Sold in a pack of 4. 

• 100 Grains or 125 Grains

• Cerekoted Blades

• No O-Rings

• No Lock Collars

• No Rubber Bands

• Flies like a field point

• Opens Every Time guaranteed

• Sweep back blade design for max penetration

• Sharp blades included for the practice head