Tru-Fire Technology

Our patented 360 line of releases has a head and body that are independent of each other. This means you get full rotation in front of the body, not behind.
For a release to have Tru torque-free rotation, the head of the release (where the jaws are located) and the body of the release (where the trigger is located) must be two separate components. To be truly torque free, the head of your release where the jaws are housed should be able to rotate independently of the body. Take a look at our 360 line of releases to see the only Tru-rotating wrist models on the market. Note: Tru-Rotation is an extremely important feature when your release is directly attached to your bow's serving.

If you want the finest, most precise length adjustment system in the industry - you've found it. Our system can adjust the length between the trigger and the strap by over 1". Within that inch, there are 32 different length positions you can set. All this is done without the use of a tool. Just turn the head of the release or the black barrel behind the head and you are set. It's that simple. Length adjustment is important for proper index finger placement on your trigger. If your release is too long and you are reaching for the trigger, target panic can set in. Another situation is if you put a glove on under your release. Because of the thickness of the glove, the trigger will now be too close to the strap. With our system, just turn the head and your adjustment is made.

Our Evolution buckle strap proves once again why we are the leaders of the release industry. Innovation, quality, and craftsmanship all rolled up into one!

With our new design, you will never have to fumble to get the end of your strap through the buckle because it already is through the buckle via our "arrowhead". There is no need to ever have to pull the arrowhead out of the buckle. It works great with or without gloves.

Unlike other buckle straps on the market, we go the extra mile by having a piece of ballistic material layered between the leather portion of the strap and the padded material. This material keeps any stretching while drawing your bow, near zero.

Our strap attachment also allows the head to pivot left and right and also fall away.

Our new Buckle Foldback system is simple yet it gets the job done. It takes just 1 lb. of pressure to put the release in the stowed position and only 1 lb. of pressure to get it back to the shooting position.

When we say that our releases can handle excessive amounts of weight and years of use, we can prove it! With our exclusively designed release tester, we can automatically load onto the release, rotate the head (if applicable), apply pressure, and fire the trigger in mere seconds, via pneumatics. During the development of a new release, we test the new model at a staggering 200 pounds for 20,000 continuous cycles. By testing our products at this extreme level of weight and cycles, we are insured that you the consumer will have a release that will not fail you.

Our quality is what we live by!